We
are the leading manufacturer of :Powder Coating Machine and
Booth Powder Coating Plant, Electric Oven & Gas System,
Conveyor, Diesel Fired Oven, Liquid Spray Painting Booth etc.
Powder
Coating Machine
Powder
coating gun ANJALI has been designed for all kind of
electrostatic powder coatings. Tube Shaped Objects,
Cycle Automobile parts, Garden Equipment, House-hold
Application, Furniture sanitary fittings, steel and
Aluminum sections, metal works parts articles made of
wire and perforations.It is remarkable efficient for
all type of powder Epoxy, Epoxy polyester, polyurethane
etc. Equipments are simple, maintenance free and come
with free installation. Operator training and excellent
offer service back-up.
2. High voltage generator with powder
output and velocity controller 1No.
3. Powder Hopper 1
No.
Powder spray gun is used connected of an air compressor
and the gun is triggered, the fluidised powder inside
30-90 KV DC output, Compressed air flowing from below
the fluid tile of the hopper, fluideses powder in the
hopper.
When unit is properly connected to an air compressor
and the gun is triggered, the fludised powder inside
the barrel or the gun is charged and is sprayed out,
fine and coarse controls to get varied powder, Air Mixture
are provided to get optimum result, short circuit current
is limited to less than 100 Micro amps to eliminate
danger to the operator.
TECHNICAL DATA
1. Powder Output 30Kg./Hr.norminal
at 5 bar pressure
2. Max
Air Pressure 7.5
bar.
3. Operating
Pressure 5.0
bar.
4.
Supply voltage 220/240
volts AC 1 ph, 50 Hz
5.
Powder
Consumption
50VA
6. Hopper Capacity
15
Kg.
7. Length of H-V cables &
powder hose 3
1/2 mts.
8. Spray Pattern Variable
to Suit works. Three spreaders
are supplied as standard
Special Feature.
1. Best charging is ensured by a set
of electrodes fitted inside the nozzle, giving the highest
charging efficiency.
2. Modular construction for easy repairs
and maintenance in rare case of breakdown.
3. Set of deflector/pattern, setter
to keep the charging edge clean.
4. Feather touch trigger for fatigue
free operation.
5. Increase of accidental contact of
gun tip with article belling coated voltage drops to
zero, however unit will not be switched off, take back
the gun and start coating.